LD50_abar

Table of Contents

This project is abandoned and its default file will likely not work with the most recent version of World of Warcraft. Whether this project is out of date or its author has marked it as abandoned, this project is no longer maintained.

Type /ld50_abar for commands.

A swing timer that works for a change. It also correctly supports dual Wielding

Features:

- Correctly Supports Dual Wielding

- Shows what causes the swing timer to reset

- Has a latency Overlay

- Works with 2 handed weapons

- A very directed scope to just a swing timer.

- Out of combat fade out.

- Update frequency setable (fps)

Setup - the left numbers are the current swing speed - the right numbers are the time left on the swing - the overlays show the latency - the center text shows what caused the swing timer to reset.

Comments

_ForgeUser2637979
- Join Date: 5/26/2009
- Posts: 1
- Member Details
#49 _ForgeUser2637979

View User Profile

Send Message

Posted Feb 12, 2010
nice addon !

but it would be awesome if there's an option to hide specific bars completely .. like the castbar for example.

Rollback Post to Revision RollBack
Lothaer
- Join Date: 9/26/2006
- Posts: 35
- Member Details
#47 Lothaer

View User Profile

Send Message

Posted Dec 29, 2008
can you please change the slash command from /ld50_abar to just simply /ld50?

Rollback Post to Revision RollBack
_ForgeUser65286
- Join Date: 1/23/2006
- Posts: 0
- Member Details
#46 _ForgeUser65286

View User Profile

Send Message

Posted Dec 25, 2008
It seems AD50_abar blocks incoming custom-made item-links of the addon "Gryphonheart Items"-addon. Any clues on what might be wrong?

Rollback Post to Revision RollBack
_ForgeUser1696488
- Join Date: 6/27/2019
- Posts: 0
- Member Details
#45 _ForgeUser1696488

View User Profile

Send Message

Posted Nov 24, 2008
Love the addon and i know the guy ingame that made it Thanks a bunch. 5/5

Rollback Post to Revision RollBack
_ForgeUser592791
- Join Date: 3/10/2008
- Posts: 0
- Member Details
#44 _ForgeUser592791

View User Profile

Send Message

Posted Nov 22, 2008
MuDvAyNe

Rollback Post to Revision RollBack
_ForgeUser13535
- Join Date: 4/25/2005
- Posts: 1
- Member Details
#42 _ForgeUser13535

View User Profile

Send Message

Posted Nov 10, 2008
Question:
Would you rather a suspend the timer when you slam and come back to a swing timer just like it was before a slam

OR

Would you like to come back to a new swing bar with just the time remaining.

ALSO

I ported all three of the LD50 addons to Ace3 and clean up a few rough points, so the next release is soon.

Rollback Post to Revision RollBack
_ForgeUser1229477
- Join Date: 10/5/2008
- Posts: 3
- Member Details
#43 _ForgeUser1229477

View User Profile

Send Message

Posted Nov 11, 2008
I would much rather have a bar that is suspended, and then continues. Theres really no point to having the swing timer be a bar if the amount of time represented by its length is constantly changing; might as well just have it be some text if you're going to make it reset every time you slam.

Rollback Post to Revision RollBack
_ForgeUser1296390
- Join Date: 10/15/2008
- Posts: 0
- Member Details
#48 _ForgeUser1296390

View User Profile

Send Message

Posted Dec 30, 2008
I've noticed in release 3.3 that the swing timer changes to reflect the cast bar (slam), while slam is casting, then reverts back to tracking swing. Is there any way of disabling the mod from trying to show my cast bar? It's a bit jarring for the bar to suddenly become a 0.5 second (or 1.5 untalented) slam cast bar, then jump back to representing swing time.

Rollback Post to Revision RollBack
_ForgeUser13535
- Join Date: 4/25/2005
- Posts: 1
- Member Details
#41 _ForgeUser13535

View User Profile

Send Message

Posted Nov 4, 2008
released a beta been working on all these issues, not 100% happy with my solution yet.

Rollback Post to Revision RollBack
_ForgeUser87620
- Join Date: 4/29/2006
- Posts: 12
- Member Details
#40 _ForgeUser87620

View User Profile

Send Message

Posted Oct 25, 2008
This addon has issues when warriors use Slam. Since Slam no longer resets the swing timer, any use of it will cause the timer to be off until the next autoswing. Here is an example with a 3.5s 2H:

* I autoswing. The timer shows 3.5s and counts down.
* With 3.0s, I start a slam, which has a 1.5s cast time untalented.
* I perform Slam with essentially 1.5s left on the swing timer.
* The swing timer reset to 3.5s. This is the part that is now wrong.
* About 1.5s later, I autoswing. The swing timer resets again, showing 3.5s left. It is now in sync again.

This may also be an issue with hunters and steady shot as I believe it follows similar behavior. Both Slam and (I believe) Steady Shot now push back the autoattack/autoshot in the case of overlap instead of consuming it. Let me know if you have any questions or if the description did not make any sense.

Rollback Post to Revision RollBack
Farmbuyer
- Join Date: 2/14/2005
- Posts: 17
- Member Details
#37 Farmbuyer

View User Profile

Send Message

Posted Oct 23, 2008
Using ld50_abar 3.1 and a normal 2H weapon, every result text on a normal hit is showing up as "Resisted". No buff spells or anything to cause additional magical damage, and no resists of any kind showing up in the combat logs. I might try some debugging to print what spell LD50 thinks is being resisted, but have no experience with the combat event code yet.

Rollback Post to Revision RollBack
Farmbuyer
- Join Date: 2/14/2005
- Posts: 17
- Member Details
#38 Farmbuyer

View User Profile

Send Message

Posted Oct 23, 2008
Forgot to add: this happens with only LD50_abar enabled, and all other addons moved aside.

Rollback Post to Revision RollBack
Farmbuyer
- Join Date: 2/14/2005
- Posts: 17
- Member Details
#39 Farmbuyer

View User Profile

Send Message

Posted Oct 23, 2008
Heh, figured it out. The Wrath client adds new parameters to some combat events; adding those parameters to the parsing code gets it all working. What's the easiest way to send you the changes I've made to my local copy to get it to work?

Rollback Post to Revision RollBack
_ForgeUser89194
- Join Date: 5/6/2006
- Posts: 0
- Member Details
#36 _ForgeUser89194

View User Profile

Send Message

Posted Oct 18, 2008
Thanks for the update!

Rollback Post to Revision RollBack
_ForgeUser1404249
- Join Date: 6/27/2019
- Posts: 0
- Member Details
#35 _ForgeUser1404249

View User Profile

Send Message

Posted Oct 17, 2008
I can't get my ld50_abar up since the latest patch and it won't recognize the /ld50_abar commands. Any thoughts?

Rollback Post to Revision RollBack
_ForgeUser13535
- Join Date: 4/25/2005
- Posts: 1
- Member Details
#34 _ForgeUser13535

View User Profile

Send Message

Posted Oct 17, 2008
okay libraries should be correct now, I will get the new slam functionality done this weekend.

Rollback Post to Revision RollBack
_ForgeUser13535
- Join Date: 4/25/2005
- Posts: 1
- Member Details
#33 _ForgeUser13535

View User Profile

Send Message

Posted Oct 17, 2008
hmm new source control system here at curse, I though i had that issue fixed, well i will try tagging it again.

Lots of developers having issues this week :)

Rollback Post to Revision RollBack
Vonwarr
- Join Date: 10/17/2008
- Posts: 0
- Member Details
#32 Vonwarr

View User Profile

Send Message

Posted Oct 17, 2008
Wow, I added a line of script to my reply to SmuvMoney and it broke the comment system...

Anyways, I just had to edit the embeds.xml file to make the folder path agree with the name of the LibSharedMedia folder from my Omen install.

Rollback Post to Revision RollBack
_ForgeUser87620
- Join Date: 4/29/2006
- Posts: 12
- Member Details
#30 _ForgeUser87620

View User Profile

Send Message

Posted Oct 17, 2008
I noticed that two libraries were left out of the release that are listed in embeds.xml:
CallbackHandler
LibSharedMedia
If you update from v48 or earlier, you won't notice the error unless you use an updater that deleted the folder before upgrading. If you update to this version directly without having a previous version, you get errors about missing libraries.

Rollback Post to Revision RollBack
_ForgeUser87620
- Join Date: 4/29/2006
- Posts: 12
- Member Details
#29 _ForgeUser87620

View User Profile

Send Message

Posted Oct 17, 2008
I noticed that two libraries were left out of the release that are listed in embeds.xml:

CallbackHandler
LibSharedMedia

If you update from v48 or earlier, you won't notice the error unless you use an updater that deleted the folder before upgrading. If you update to this version directly without having a previous version, you get errors about missing libraries.

Rollback Post to Revision RollBack
To post a comment, please login or register a new account.