PitBull Unit Frames 4.0

Woof. Arf. Yip.

Getting Started:

You can help translate PitBull for your language with the localization tool.

Classic

PitBull works with WoW Classic! Classic Era/Vanilla is supported in v4.3.x-vanilla releases. Cataclysm Classic is supported in v4.2.x releases (the same releases retail use).

Classic Era caveats:

Aura duration is not available from the API, so PitBull uses LibClassicDurations to show them. The duration can be inaccurate if it's affected by rank or talents.
Cast info is only available for your spells from the API. PitBull uses LibClassicCasterino to show cast bars for other units, but this can be inaccurate since there is a lot of guess-work involved.

Download

CurseForge: https://www.curseforge.com/wow/addons/pitbull-unit-frames-4-0

Wago: https://addons.wago.io/addons/pitbull4

WoWInterface: https://www.wowinterface.com/downloads/info20021

GitHub: https://github.com/nebularg/PitBull4/releases

Comments

_ForgeUser47116
- Join Date: 11/5/2005
- Posts: 0
- Member Details
#3639 _ForgeUser47116

View User Profile

Send Message

Posted Nov 5, 2010
I still have this problem, 100% recreatable with no addons other than Pitbull4 active. I'm most puzzled. The saved variables file is being updated but unassigned layouts are not visible on the layout dropdowns. It's not a huge problem but I was hoping to have some canned layouts to switch in and out of as needed. I assume the way to create a new layout is to just type the name in the new layout area of the layout editor and click the OK button that appears. Nothing else, no manual saving or anything? This is with Beta 17.3 from a day or two ago

Rollback Post to Revision RollBack
shefkin
Curse Premium
- Location: North Bend
- Join Date: 2/28/2007
- Posts: 381
- Member Details
#3601 shefkin

View User Profile

Send Message

Posted Nov 2, 2010
Increase the size of the other bars and it'll become smaller. The bars are sized relative to the total size of all the bars. Let's say you have two bars, a health bar and a power bar. The healthbar is set to 2 and the powerbar is set to 1. The total of those bar sizes is 3. So the halthbar will take up 2/3rds of the height and the powerbar will take up 1/3rd.

If you change the health bar to 4 and leave the powerbar at 1 then the powerbar then the total will be 5 and the healthbar will take up 4/5ths and the healthbar will take up 1/5th.

Rollback Post to Revision RollBack
_ForgeUser3086389
- Join Date: 10/30/2022
- Posts: 0
- Member Details
#3595 _ForgeUser3086389

View User Profile

Send Message

Posted Nov 1, 2010
Is there a way to decrease the size of the player, target, etc. health and mana bar even more? Here's a pic of what size mine is currently at:

http://img696.imageshack.us/img696/4582/healthbarsize.png

Thanks.

Rollback Post to Revision RollBack
_ForgeUser3086389
- Join Date: 10/30/2022
- Posts: 0
- Member Details
#3596 _ForgeUser3086389

View User Profile

Send Message

Posted Nov 1, 2010
The mana bar isn't at the lowest size. The health bar is though.

Rollback Post to Revision RollBack
_ForgeUser1201453
- Join Date: 9/30/2008
- Posts: 0
- Member Details
#3597 _ForgeUser1201453

View User Profile

Send Message

Posted Nov 2, 2010
Decrease the overall size of the layout.

Under General > Size > Height.

Rollback Post to Revision RollBack
shefkin
Curse Premium
- Location: North Bend
- Join Date: 2/28/2007
- Posts: 381
- Member Details
#3600 shefkin

View User Profile

Send Message

Posted Nov 2, 2010
PitBull4_Frames_player, note the capital B. Frame names are case sensitive.

Rollback Post to Revision RollBack
_ForgeUser1201453
- Join Date: 9/30/2008
- Posts: 0
- Member Details
#3592 _ForgeUser1201453

View User Profile

Send Message

Posted Nov 1, 2010
Any help please?

http://wow.curse.com/downloads/wow-addons/details/pitbull4.aspx?CommentPage=3#861452

Never quite got an answer.

Rollback Post to Revision RollBack
shefkin
Curse Premium
- Location: North Bend
- Join Date: 2/28/2007
- Posts: 381
- Member Details
#3593 shefkin

View User Profile

Send Message

Posted Nov 1, 2010
Probably the best way to do this at current is to put both texts in the same text setup and then put a \n between them. There are some limitations of the current layout system and you're running into them. We can't just provide an offset slider because of the way things are laid out.

Rollback Post to Revision RollBack
_ForgeUser1201453
- Join Date: 9/30/2008
- Posts: 0
- Member Details
#3594 _ForgeUser1201453

View User Profile

Send Message

Posted Nov 1, 2010
lol. Dang. Alright, thanks for the help.

I have been messing with a workaround by taking away the border/background of the unit frame entirely and using kgpanels to simulate the background. I just can't get kgpanels to parent to Pitbull4_Frames_player that /framestack is telling me it is named. If I try, the panel disappears entirely.

Is /framestack lying to me?

Rollback Post to Revision RollBack
_ForgeUser2396552
- Join Date: 7/6/2019
- Posts: 0
- Member Details
#3585 _ForgeUser2396552

View User Profile

Send Message

Posted Nov 1, 2010
Hey, Sol here from garrosh. I miss you Shefki and Trill.

But onto my real problem. For some reason when I have PB4 enabled and turned on, the default Blizzard Buff/Debuff bars do not show up.

I'm not getting an Error. Also I sent Shefki my real ID on message on Curse, tell him to check and give it to you as well!

Rollback Post to Revision RollBack
_ForgeUser1073194
- Join Date: 8/25/2008
- Posts: 36
- Member Details
#3587 _ForgeUser1073194

View User Profile

Send Message

Posted Nov 1, 2010
SOL! *hugglepounce*

Start here: /pb Modules > Hide Blizzard Frames and ensure that buffs/debuffs is not checked. A couple reports say you may have to check and uncheck.

If that is unchecked... do you have any other buff add on that could be interfering?

Rollback Post to Revision RollBack
_ForgeUser2396552
- Join Date: 7/6/2019
- Posts: 0
- Member Details
#3603 _ForgeUser2396552

View User Profile

Send Message

Posted Nov 2, 2010
<3! Thank you so much :) Also both of you add me! I miss you guys! Check your messages on Curse.

Rollback Post to Revision RollBack
_ForgeUser1520356
- Join Date: 10/27/2008
- Posts: 0
- Member Details
#3584 _ForgeUser1520356

View User Profile

Send Message

Posted Nov 1, 2010
Can Pitbull display "Raid Boss Health Bar 1-4" and replace the default ones?

Rollback Post to Revision RollBack
_ForgeUser1073194
- Join Date: 8/25/2008
- Posts: 36
- Member Details
#3586 _ForgeUser1073194

View User Profile

Send Message

Posted Nov 1, 2010
Not yet! This is a requested feature and you can vote on the ticket and add your comments on wowace. (same login and pw as here) I believe its on the "to-do" list.

Rollback Post to Revision RollBack
_ForgeUser1073194
- Join Date: 8/25/2008
- Posts: 36
- Member Details
#3588 _ForgeUser1073194

View User Profile

Send Message

Posted Nov 1, 2010
Tough one! I had to do some asking (thanks Cloveresque of Malygos!) to ensure I knew how it was implemented.

This is currently set up to work like the default Blizzard behavior which treats shadow orbs as a buff (aura) that stacks. Holy power and Soulshards in the default are actual bars in the default. The difference being that one is a buff you gain power form having, but don't choose when to use, the others are resources like energry/rage/mana that you choose when to use.

You can certainly make a ticket on wowace requesting this additional functionality (same login and pw as here) but that's why it was implemented the way it was. :)

Rollback Post to Revision RollBack
shefkin
Curse Premium
- Location: North Bend
- Join Date: 2/28/2007
- Posts: 381
- Member Details
#3590 shefkin

View User Profile

Send Message

Posted Nov 1, 2010
Disinclined to do something like this. The holypower/soulshard implementations exist to replace something the default UI provides and that you can't see any other way. As Trill has pointed out this is a buff. You can probably use PitBull4_AuraBar to get a bar for this, but I can't say I've ever used it.

Rollback Post to Revision RollBack
_ForgeUser5940136
- Join Date: 11/1/2010
- Posts: 0
- Member Details
#3583 _ForgeUser5940136

View User Profile

Send Message

Posted Nov 1, 2010
I apologize if this has been asked, but is there any intention of adding a shadow orb bar, like existing holypower/soulshard bars?

Rollback Post to Revision RollBack
shefkin
Curse Premium
- Location: North Bend
- Join Date: 2/28/2007
- Posts: 381
- Member Details
#3582 shefkin

View User Profile

Send Message

Posted Oct 31, 2010
@Tinolyn, What's done is stable. I just don't consider it feature complete yet.

Rollback Post to Revision RollBack
tinolyn
- Location:
- Join Date: 12/10/2007
- Posts: 55
- Member Details
#3581 tinolyn

View User Profile

Send Message

Posted Oct 31, 2010
Out of curiosity...how close are we to having this as release quality?

I mean, from a personal standpoint, it seems already doable in release form, but I'm not a programmer, so my opinion is likely wrong. :P

Rollback Post to Revision RollBack
_ForgeUser1195997
- Join Date: 12/25/2020
- Posts: 0
- Member Details
#3578 _ForgeUser1195997

View User Profile

Send Message

Posted Oct 31, 2010
are there plans to make the raid groups moveable like in Pitbull 3? having one large static raid frame is a bit annoying since not everyone puts tanks in G1, etc and i like to have the tank group closest to my bars.

Rollback Post to Revision RollBack
To post a comment, please login or register a new account.

Project ID

7522
Created

Aug 1, 2008
Last Released File

Oct 12, 2025
Total Downloads

5,490,064

ckknight Owner
nebula169 Author
shefkin Author
Stanzilla Ticket Manager

WowAce

PitBull Unit Frames 4.0

Addons

PitBull Unit Frames 4.0

Table of Contents

PitBull Unit Frames 4.0

Classic

Download

Comments

About This Project

Categories

Members

Recent Files

WoW Retail

WoW Mists of Pandaria Classic

WoW Classic