WowAce

Please can you get this updated so that it once again shows up my hots in their respective corners. I love Grid, and its bits and bobs, and really DETEST the revolting thing that Blizzard have forced on us. At present no matter which I cast "Regrowth, Rejuv, Lifebloom" ... it only shows up on 1 of the corners, as 1 incoming heal. I have Lifebloom set at top right (with stacks), Regrowth+Rejuv at Bottom Left, and Inc heals (generally) on bottom right. However, as said, they only show up as 1 incoming heal on the bottom right.

Just did a raid and I'm constantly getting Lua errors, can't even play without having the "Display Lua Errors" box unchecked.

Apparently it is caused by the Hots addon. No idea what's wrong.

Message: Interface\AddOns\GridStatusHots\GridStatusHots.lua:1641: attempt to compare number with table

Time: 10/18/10 17:38:32

Count: 2566

Stack: Interface\AddOns\GridStatusHots\GridStatusHots.lua:1641: in function `UpdateUnit' Interface\AddOns\GridStatusHots\GridStatusHots.lua:1486: in function <Interface\AddOns\GridStatusHots\GridStatusHots.lua:1484> (tail call): ? [C]: ? [string "safecall Dispatcher[2]"]:9: in function <[string "safecall Dispatcher[2]"]:5> (tail call): ? ...rface\AddOns\Grid\Libs\AceTimer-3.0\AceTimer-3.0.lua:164: in function <...rface\AddOns\Grid\Libs\AceTimer-3.0\AceTimer-3.0.lua:138> Locals: <none>

Does this work for you guys now?

I had my first raid yesterday with the new Grid setup and I noticed a lot of the timers "freeze" randomly or simply don't show anymore. The spells affected are:

Lifebloom: doesn't show a timer most of the time. Wild Growth: shows the timer randomly, freezes on a random number. Regrowth: shows a timer most of the time. Rejuvenation: never shows a timer.

I love this addon, it has for a long time been an essential part of my Grid setup and I'm grateful to see it being updated for 4.0.1. I tried installing it today and noticed two issues - with color selection, it will almost always reset to a color and opacity other than the one I selected when I try to change it from the default (e.g. I'll try to change it from green to yellow and it'll end up aquamarine or something). Also, certain check-boxes I can't seem to 'un-check' (e.g. 'Show HoT-Counter'). I've encountered similar issues with at least one other Grid addon, GridCooldownSwiftmend. In any case, I just thought I'd mention these issues in the hopes of a fix. Thanks!

I disabled all my addons now, apart from Grid and the HoT modules and the result is still the same. For Regrowth, Wild Growth and Lifebloom it works fine to enable the corner text and set it to "HoTs: My Regrowth/Wild Growth/Lifebloom" but for Rejuvenation, if I only enable the "HoTs:" buff, it won't show me any text that Rejuvenation is on the target, only if I enable "Buff: Rejuvenation" it writes the word "Rejuve" in the corner while all the other heals work with "HoTs:" and will show a timer in each corner, this spell won't.

I hope this explains the problem a bit better and maybe you can draw some conclusion out of it or even a solution :)

I love this addon, it has for a long time been an essential part of my Grid setup and I'm grateful to see it being updated for 4.0.1 (just downloaded the most recent version from wowace, it appeared to me more up-to-date than the version here). I tried installing it today and noticed two issues - with color selection, it will almost always reset to a color and opacity other than the one I selected when I try to change it from the default (e.g. I'll try to change it from green to yellow and it'll end up aquamarine or something). Also, certain check-boxes I can't seem to 'un-check' (e.g. 'Show HoT-Counter'). I've encountered similar issues with at least one other Grid addon, GridCooldownSwiftmend. In any case, I just thought I'd mention these issues in the hopes of a fix. Thanks!

first off thank you for this addon and the updates.

after updating today i finally see the statushots showing up in the grid config, however i'm still not seeing it on the unit frame. here is the error i get:

1x GridStatusHots-3.32\GridStatusHots.lua:1544: attempt to call method 'ScheduleRepeatingEvent' (a nil value)
(tail call): ?:
<in C code>: ?
<string>:"safecall Dispatcher[1]":9: in function <[string "safecall Dispatcher[1]"]:5>
(tail call): ?:
AceAddon-3.0-5 (ButtonFacade):539: in function <...dOns\ButtonFacade\Libs\AceAddon-3.0\AceAddon-3.0.lua:532>
(tail call): ?:
(tail call): ?:
Grid-r1376\GridCore.lua:136: in function `EnableModules'
Grid-r1376\GridCore.lua:91: in function `OnEnable'
Grid-r1376\GridStatus.lua:370: in function <Grid\GridStatus.lua:369>
(tail call): ?:
<in C code>: ?

Correction, got it working when i installed the right addon ><

thanks again

Huge fan of the addon, registered to say I am also not seeing Rejuv, although I never had a problem before (was using version 3.32 before patch I think). I've tested while only running grid, grid status corner text, and your addon, all of which I updated today. Will try a few things myself to try and zero in on the problem... :)

Edit: getting an error at line 1640 of GridStatusHots.lua (rejuv code) saying "attempting to compare number with table".

Edit2: also on my priest, I notice the that the addon *sometimes* thinks power word: shield is still on someone even though it has already been absorbed... but only some of the time. And hots sometimes tick down to -1 instead of stopping at 0. :)

After removing some outdated addons (in my case CowTip), rejuvenation no longer causes massive lag spikes. However my problem is not entirely solved yet :(

What I have done is update to latest version of Grid Status Hots and Grid Status Corner Text Indictators. Then setup grid accordingly (put rejuv in corner text right top, regrowth in corner text left top, lifebloom in center text 2).

Regrowth and Lifebloom are working perfectly, but Rejuvenation isn't showing. Also, when I cast Rejuv *after* Lifebloom, the Lifebloom counter *stops* ticking until Rejuv falls off.

Like I said I removed outdated addons, updated to latest versions .. it helped some, but still not 100% :(. Any more ideas ?

It would be massively helpful if you could do a basic faq for what to do to get the addon running. I have deleted all signs of grid from my WTF folder and of course all grid related addons from my addons folder, then reinstalled the latest versions of grid and gridstatushots. Having done this, I get no functionality (corner indicators, etc). I can see the menu option for choosing "HOT: my regrowth" etc., but get no indicator when I cast. I do get the indicator for "buff:regrowth", the default grid indicator. I have installed Ace3 and removed Ace2. I do not know what else to try. Thanks in advance for any help!

Haha very true!

Hi,

I have tried r153 of the addon using druid hots and it now works fine for them. I tried rejuv, lifebloom, regrowth and wildbloom all report ok. One thing though you dont really need the decimal point in the secound countdown timer its distracting and takes up additional real estate on the grid blocks. I would suggest ditching the decimal place and letting the timer countdown in seconds. Seems to be working as it did before tho for me anyway, thanks :)

Everything on this addon seems to be working great for me! :) I'd like to make a request though, would it be possible if you could add the 2 new HoTs ( "Holy Word: Aspire" and "Echo of Light") from Holy priest? Also, thanks for updating this addon so quickly :)

EDIT:

I installed the r49 version and reloaded WoW and had no HOT: options at all. I then removed r49 and reinstalled the latest version and everything seems to work. very strange, as nothing was really changed.

I cannot get your addon to work currently. Here is what i have done;

deleted all grid addons from AddOns dir did a search for Grid at the WoW dir root and deleted all grid.lua's from wtf and any other grid files installed grid and grid status hots from wowace and grid indicator corner text from Curse installed ace3 pack from wowace

i appear to have a fresh install of grid, with none of my previous settings. i can use Buff: rejuv/lifebloom with center text, corner icon and corner text i have the Hott: rejuv/lifebloom in the statuses list for the above indicators, but nothing shows up when selected i do not receive any errors i completed all the above tests with only one status selected at a time for each of the indicator locations.

Can you provide any suggestions?

Thanks, Tristan