WowAce

I edited my \World of Warcraft\WTF\Account\xxxxxxxxxxxx\SavedVariables\Gathermate2.lua and manually added the wowhead co-ords for all Dragonblight chests - not 100% accurate but it resulted in finding a chest

Example:

wowhead map with pin for chest = 72.8,73.5
Wowhead co-ords are 6 digits - converted to 4 digits in data file 7280 7350 and add 00 at the end results in 7280735000
gathermate location for dragonblight is [488]

Edited with Notepad++

GatherMate2TreasureDB = {
    [488] = {
        [7280735000] = 540,
    },
}

Dragonblight map only shows 29 locations yet there are 31 mentioned in title.

hope someone adds these to the gathermate2_data in the near future :)

This is driving me up the wall. I cannot for the life of me get Maplewood and Dark Iron treasure chests to show up. I found a ticket from March 2011 with the same problem, and that ticket was resolved in June 2011 (http://www.wowace.com/addons/gathermate2/tickets/39-missing-treasures/).

I'm assuming it's PEBCAK, but I don't know what I'm doing wrong. I've reinstalled GatherMate2 and the newly updated GatherMate2_data, flattened the database, imported over and over but they're not showing up.

Edit: Just to be explicit, I have checked the Wowhead data on treasure chests and compared to what GatherMate2 is showing after importing (and flattening/reimporting/cleaning up), there are quite a few nodes missing.

For over a year i have been having the same problem that Outland Gas clouds will not be recorded by Gathermate - i have removed the nodes from the database and even re-installed the addon and kept upto date with the Data file but still Gathermate will not record or change locations of the nodes when i gather them. Take Felmist - today 9th June 2012 in Shadowmoon Valley - all the nodes show up on my maps but they are innacurate - cannot add nodes to the map/database when gathering new node points.

Aha - found the problem - i had all gases turned off while Felmist was on - gathermate adds new nodes for Felmist as Steam Cloud (305) - so now i track this instead of importing Felmist....

Not a problem as long as locations are added - if its called Steam Cloud or Felmist doesnt matter :)

For people trying to track specific types - just enable all gas clouds and accept the fact that what it is doesnt matter as in outland the nodes are not found near each other - Felmist only in Shadowmoon - Air in Nagrand - etc -

Logged out and back in and now nothing works - cannot create/add any new felmist nodes to my map or database..

Frustrating to say the least.

UPDATE: 10th June

Removed and replaced with latest Alpha - turned off all other professions except Gas - gathering a node does not add it to the Database - nothing is being written to the Gathermate.LUA file except the instruction to not track mining herbing etc - gas is shown as true.

Did some more testing - and at first i thought TOMTOM might be a conflicting addon as it uses the same lib - however as i use AddonControlPanel most switching on and off of addons is done using /reloadui ( /console reloadui ) and this is where the problem has become apparent.

If i use /reloadui then Gathermate becomes broken and will not add gas nodes to the database.
If i shut down the game and start it up again then gathering gas nodes works again.

GatherMate2's data gets updated a couple of times a month. Gatherer's data (http://www.wowinterface.com/downloads/info11707-GathererDBWoWHead.html) hasn't had an update since November 2011. That doesn't necessarily mean that Gatherer's data isn't current, but........

I'm pretty sure this is obvious but I still wanted to ask. What is the difference between Gatherer and Gathermate2? I have been using Gatherer for a while but it is out-of-date and I saw this one but I dont see what the diff betweent he 2 is. Any help?

I'm hoping there won't be any difference - Gatherer looks to be dead for good.

There must be some minor bug or something? Alliance Executus all the mining nodes are not working correctly, if i switch to one of my other servers mining all the dots show up correctly all mining nodes show mining is available. But its not working properly on just Executus server i can't figure it out?

Most of the empty dots tell me how to fix (clean up duplicates made​​)

this screen

http://s019.radikal.ru/i604/1205/c5/f2a32d7a3174.jpg

Hi, y can't import any data and the nodes don't show me on the minimap

This change will make the World map icons do the same thing as the minimap icons (shown or hidden) when you press the minimap keybinding.

in Bindings.xml, copy line 3 and paste it in as a new line 4:  In the new line 4, edit both occurences of "showMinimap" and change to "showWorldMap"  Be careful to get the case correct.  showWorldMap needs a 'M' while showMinimap needs a 'm'

line4: GatherMate2.db.profile["showWorldMap"] = not GatherMate2.db.profile["showWorldMap"]

Thanks a lot! =]

I got a request.

You currently allow to make a Hotkey to Toggle Minimap Nodes, but i would like one to Toggle to World Map On and Off.

Or make it possible thru a Macro Command for that matter, that's how i did it for Gatherer.

Is there a way to transfer the data collected from one computer to another? Because I play wow on 2 computers. but its annoying when the gathered nodes aren't on one.

copy this file from one computer

World of Warcraft\WTF\Account\YourAccountName\SavedVariables\GatherMate2.lua

and put it on the other computer in the same location.

I know this may seem silly, but what is the / command to configure this?

nodes of mining dont show in language "Portuguese", herbalism show all

Entering darkmoonfaire It shows LibMapData-1.0 is missing data for 823