WowAce

Hi, thanks for working on this.
There is however one thing I've noticed. Steam Clouds won't display on either the mini-map or area map. Cinder Clouds will display and track ok though.

Works great, seems to be the same as GatherMate I tried it on both Herb and Mineral nodes. No errors or problems that I could see. Near as I can tell alot of the Add-On's that Vandermint has turned on have not been updated for the new patch. I was getting similar errors till I turned them off. One of the best (as far as I can tell) updates for the 4.01 patch I've used yet. Most other updates are still a little buggy.

i am noticing the same thing, i tried to figure out all zones affected, here are the zones that show up with no nodes which i think are supposed to:
The Barrens
Stranglethorn Vale
Alterac Mountains
Teldrassil

Hi. i don't know if this is an issue with GatherMate or WoW. Anyway. I have everything installed and when i look at my minimap or world map some regions apparently have no nodes sowing up. The barrens and stranglethorn are 2 such zones. these places usually have tons of herbs. herbs show via the normal track herbs but nothing via gathermate. other regions seem unaffected.

Getting the following error when trying to import the gathermate2 data, and it ends up not importing anything. Tried multiple different adjustments with the same result.

Date: 2010-10-15 01:26:07
ID: 1
Error occured in: Global
Count: 1
Message: ..\AddOns\GatherMate2\GatherMate2.lua line 187:
table index is nil
Debug:
(tail call): ?
GatherMate2\GatherMate2.lua:187: InjectNode()
GatherMate2_Data\GatherMateData.lua:83: MergeMines()
GatherMate2_Data\GatherMateData.lua:67: PerformMerge()
GatherMate2\Config.lua:1056:
GatherMate2\Config.lua:1047
(tail call): ?
[C]: ?
[string "safecall Dispatcher[3]"]:9:
[string "safecall Dispatcher[3]"]:5
(tail call): ?
...nfig-3.0\AceConfigDialog-3.0\AceConfigDialog-3.0.lua:797:
...nfig-3.0\AceConfigDialog-3.0\AceConfigDialog-3.0.lua:612
(tail call): ?
[C]: ?
[string "safecall Dispatcher[4]"]:9:
[string "safecall Dispatcher[4]"]:5
(tail call): ?
...e\AddOns\ButtonFacade\Libs\AceGUI-3.0\AceGUI-3.0.lua:314: Fire()
...cade\Libs\AceGUI-3.0\widgets\AceGUIWidget-Button.lua:21:
...cade\Libs\AceGUI-3.0\widgets\AceGUIWidget-Button.lua:19
AddOns:
Swatter, v5.9.4938 (WhackyWallaby)
Armory, vv9.0.1b
ArmoryGuildBank, vv9.0.1b
Atlas, v1.17.1
AtlasBattlegrounds, v1.17.1
AtlasDungeonLocs, v1.17.1
AtlasOutdoorRaids, v1.17.1
AtlasTransportation, v1.17.1
AtlasLoot, vv5.11.05
AtlasQuest, v4.5.0 BETA
AucAdvanced, v5.9.4938 (WhackyWallaby)
AucFilterBasic, v5.9.4938 (WhackyWallaby)
AucFilterOutlier, v5.9.4938.2531
AucMatchUndercut, v5.9.4938.2531
AucScanData, v5.9.4938 (WhackyWallaby)
AucStatHistogram, v5.9.4938 (WhackyWallaby)
AucStatiLevel, v5.9.4938 (WhackyWallaby)
AucStatPurchased, v5.9.4938 (WhackyWallaby)
AucStatSales, v5.9.4938.2842
AucStatSimple, v5.9.4938 (WhackyWallaby)
AucStatStdDev, v5.9.4938 (WhackyWallaby)
AucStatWOWEcon, v5.9.4938.2530
AucUtilAHWindowControl, v5.9.4938.3311
AucUtilAppraiser, v5.9.4938.2530
AucUtilAskPrice, v5.9.4938.3175
AucUtilAutoMagic, v5.9.4938.3142
AucUtilCompactUI, v5.9.4938.2530
AucUtilEasyBuyout, v5.9.4938.3583
AucUtilFixAH, v5.8.4723 (CreepyKangaroo)
AucUtilGlypher, v5.9.4938.2545
AucUtilItemSuggest, v5.9.4938.3108
AucUtilPriceLevel, v5.9.4938.2545
AucUtilScanButton, v5.9.4938.2530
AucUtilScanFinish, v5.9.4938.2530
AucUtilScanProgress, v5.9.4938.2530
AucUtilScanStart, v5.9.4938.4819
AucUtilSearchUI, v5.9.4938.3655
AucUtilSimpleAuction, v5.9.4938.4546
AucUtilVendMarkup, v5.9.4938.2530
Auditor2, v4.3.3
AutoBarMuffin, vv4.0.1.0
Babylonian, v5.1.DEV.130
Bagnon, v2.14.0
BagnonConfig, v
BagnonForever, v1.1.2
BagnonTooltips, v
Bartender4, v4.4.11
Bartender4Dualspec, v
BeanCounter, v5.9.4938 (WhackyWallaby)
BrokerAuditor, v4.3.3
ButtonFacade, v3.3.325
ButtonFacadeDarion, v3.0.3.2
Configator, v5.1.DEV.282
DBMBurningCrusade, v
DBMCore, v
DBMOutlands, v
DebugLib, v5.1.DEV.275
FloTotemBar, v
ForteCasting, v
ForteCooldown, v
ForteCore, v1.966.1
ForteDeathKnight, v
ForteTalent, v
ForteTimer, v
ForteVehicle, v
GatherMate2, v1.0.RC-1
GatherMate2Data, v1.0
GCD, v20101014.3-beta
Informant, v5.9.4938 (WhackyWallaby)
LightHeaded, v315
Mapster, v1.3.10
Omen, v3.0.10
OPie, v
Postal, v3.4.2
PowerAuras, v3.0.0V
Prat30, v3.4.6
Prat30HighCPUUsageModules, v
Prat30Libraries, v
Recount, v
RedRange, v
sct, v6.2
SexyMap, v
SlideBar, v5.9.4938 (WhackyWallaby)
Stubby, v5.9.4938 (WhackyWallaby)
TextHUD, v
TextHUDParty, v
TextHUDTarget, v
TidyPlates, v5.13.3 (R39)
TidyPlatesGrey, v
TidyPlatesNeon, v
TidyPlatesThreatPlates, v4.0
TipTac, v10.10.12
TipTacItemRef, v10.10.12
TipTacTalents, v10.10.12
Titan, v4.3.8.30300 - Revision 386
TitanAmmo, v4.3.8.30300
TitanBag, v4.3.8.30300
TitanClock, v4.3.8.30300
TitanCoords, v4.3.8.30300
TitanGoldTracker, v4.3.8.30300
TitanLootType, v4.3.8.30300
TitanPerformance, v4.3.8.30300
TitanReagentTracker, v1.6.0
TitanRecount, v3.3.3
TitanRegen, v4.3.8.30300
TitanRepair, v4.3.8.30300
TitanVolume, v4.3.8.30300
TitanWG, v1.1.8.30300
TitanXP, v4.3.8.30300
XPerl, v3.1.0 Beta 2
XPerlArcaneBar, v
XPerlParty, v
XPerlPartyPet, v
XPerlPlayer, v
XPerlPlayerBuffs, v
XPerlPlayerPet, v
XPerlRaidAdmin, v
XPerlRaidFrames, v
XPerlRaidHelper, v
XPerlRaidMonitor, v
XPerlRaidPets, v
XPerlTarget, v
XPerlTargetTarget, v
BlizRuntimeLib_enUS v4.0.1.40000 <us>
(ck=cfe)

Is there a plan for the GatherHud?

Excellent question - anyone?

I've run the conversion but I don't see anything on my map. I've checked the settings to include always show, but still no data.

Has anyone had any luck getting the import to work? If so, what steps did you take?

Actually, I'm trying to import my original GatherMate data, not GatherMate2Data - but the import option is greyed out.

AWESOME! Okay - I thought all I needed was the original GatherMate.lua saved variable, I didn't realize I actually needed both AddOns running to be able to convert.

What I did: Ran both GatherMate and GatherMate2, together. Once in-game, went to the GatherMate2 menu, chose "Import Data --> GatherMate Conversion". Selected all of the data I wanted to import, and clicked "Convert Databses" [sic].

All nodes from GatherMate imported into GatherMate2 with no issues at all. Woo!

Did you install GatherMate2_Data ?
I downloaded both GatherMate2 and GatherMate2_Data
I disabled GatherMate on my load screen
Went into the Gathermate2 options Under
Import Data
selected GatherMate2Data and clicked import

Under my General I re selected - Only while tracking for mining
and they all showed up..

I then did a Database Cleanup and everything looks nice and clean.

there is a conversion tool already built in, at least that is what the change log says in the Pre RC2 builds

My query about the conversion tool was based on the line in the description that says "will have a conversion tool" which implies that the conversion tool is not yet available!

So, the GatherMate description now says:
"Please note this has been replaced with GatherMate2 for WoW 4.0"
This one says:
"GatherMate2 will have a conversion tool to convert older GatherMate1 data over to the new GatherMate2"
Does that mean that there's no conversion tool yet? Any chance there's going to be some additional info on installing this? If the current GatherMate_Data won't work with this what do we need to do to convert all our old GatherMate1 data?

Read the descriptions and Game version of the current releases (facepalm)

Is this intended to be for 4.0.1 or 4.0.3 when the changes happen to the old world?